For manual welding

Welding positioners type SPK-D

Bearing capacity 2.4t – 30t

A fully covered double column two-axis positioner for long parts. The hydraulic lift significantly speeds up height adjustment compared to screw positioners. Even the basic configuration positioner features stepless adjustment of table rotation speed in the entire range and is equipped with a START-STOP system.

Various optional features of the control system further expand the control capabilities of the positioner. Even the basic configuration positioner features a system for axis measurement and a position programming option with a quick position selection on the touch screen.

  • Fully covered
  • Double column double-axis positioner for long parts
  • Hydraulic lift
  • Stepless table speed control with START-STOP
  • Anchoring required
  • Optional remote control
  • Optional foot switch for START-STOP
  • Optional customization of the clamping table to customer specification

Technical specifications

Swipe right for full view

Swipe right for full view

Type SPK 12-D SPK 25-D SPK 50-D SPK 100-D SPK 150-D
Bearing Capacity (kg) 2,400 5,000 10,000 20,000 30,000
Table Torque (Nm) 9,220 21,180 61,184 106,500 283,000
Table Rotation Speed (rpm) 0.06 – 0.7 0.1 – 1.2 0.08 – 1.0 0.06 – 0.8 0.03 – 0.4
Lifting Speed (m/min) 1.6 1.6 1.6 1.2 1.1
Table Tilt Angle (°) +/- 360 +/- 360 +/- 360 +/- 360 +/- 360
A (mm) 1,280 1,500 1,600 2,200 2,400
B (mm) 1,200 1,270 2,000 1,900 1,900
C (mm) 2,640 3,090 3,460 4,310 4,950
D (mm) 800 850 900 1,100 1,250
DS (mm) 1,500 – 5,000 2,000 – 8,000 2,000 – 12,000 2,000 – 22,000 3,000 – 30,000
P (mm) 1,735 1,935 2,160 2,880 3,285
Z (mm) 1,000 1,100 1,200 1,800 2,000
Hmin (mm) 735 835 960 1,080 1,285
Weight (kg) 3,450 5,350 11,750 19,340 26,660
Type SPK 12-D SPK 25-D SPK 50-D SPK 100-D SPK 150-D
Load Capacity (lb) 5,291 11,023 22,046 44,092 66,139
Table Turning Torque (ft-lb) 6,800 15,622 45,127 78,550 208,730
Table Turning Speed (rpm) 0.06 – 0.7 0.1 – 1.2 0.08 – 1.0 0.06 – 0.8 0.03 – 0.4
Lifting Speed (ft/min) 0.06 0.06 0.06 0.05 0.04
Table Tilt Angle (°) +/- 360 +/- 360 +/- 360 +/- 360 +/- 360
A (in) 50.4 59.1 63.0 86.6 94.5
B (in) 47.2 50.0 78.7 74.8 74.8
C (in) 104.0 121.7 136.2 169.7 194.9
D (in) 31.5 33.5 35.4 43.3 49.2
DS (in) 59.1 – 196.9 78.7 – 315.0 78.7 – 472.4 78.7 – 866.1 118.1 – 1,181
P (in) 68.3 76.2 85.0 113.4 129.3
Z (in) 39.4 43.3 47.2 70.9 78.7
Hmin (in) 28.9 32.9 37.8 42.5 50.6
Weight (lb) 7,606 11,795 25,904 42,637 58,775

For manual welding

Welding positioners type SPK-D

A fully covered double column two-axis positioner for long parts.

Attach a file. The file size of your documents should not exceed 10 MB

Welding positioners type SPK-D

Contact us